Chemical name: y-aminopropyl trimethoxy silane

English name: y Aminopropyltrimethoxysilane

New blue sky stock no. : kh-540

CAS NO: 13822-56-5

Molecular formula: C6H17NO3Si

structured

Content: 98.0% or higher

Transport number of dangerous goods: --

Density (25℃) : 1.01±0.02g/ml

Boiling point: 210 °C /760mmHg

Refractive index (25℃) : 1.420 ±0.02

Flash point: 82 ℃

Physical property standard: it is a kind of organosilane with active amine groups and hydrolyzable organosilane, it is colorless, has a special ammonia taste liquid, soluble in alcohols, chain hydrocarbons and aromatic hydrocarbons and other solvents

The synthetic methods

Chloropropyl trichlorosilane was obtained by adding chloroallyl and trichlorosilane, and then reacted with methanol and reammoniated.

use

1. Glass/electronic cloth composite material: as a whole or as a component of infiltrating agent.

2, as a primer for glass and metal.

3. Casting resin: used as additive for cooling and curing phenolic resin and furan resin.

4. Used for the synthesis of amino silicone oil and its emulsion.

5, excellent bond accelerator, can be used for polyurethane, epoxy, nitrile, phenolic adhesive and sealing material, improve pigment dispersion and improve the adhesion of glass, aluminum, iron metal, also suitable for polyurethane, epoxy and acrylic latex coatings.

6. Amino group and ethoxy group are used to couple organic polymers and inorganic fillers respectively to enhance their adhesion and improve the mechanical, electrical, water resistance and aging resistance of the products. The thermoplastic and thermosetting resins, such as phenolic, polyester, epoxy, PBT, polyamide and carbonate, which are used in mineral filling, can greatly improve the physical and mechanical properties, such as flexural strength, compressive strength and shear strength, and electrical properties in wet and dry state, and improve the wettability and dispersion of filler in polymer. In resin sand casting, the adhesion of resin silica sand is enhanced, and the strength and moisture resistance of molding sand are improved. In the production of fiberglass and mineral wool, adding it into phenolic binder can improve moisture resistance and increase compression resilience.