The cleaning method of Methyltris(methyl ethyl ketoxime) silane can be carried out according to the following steps, with specific operations adjusted based on actual application scenarios:

1. Cleaning Method and Conditions

Reaction System PreparationIn a solution containing methyltris(methyl ethyl ketoxime) silane hydrochloride salt, add end-capping agent and water at a molar ratio of methyltris(methyl ethyl ketoxime) silane : end-capping agent : water = 1 : 0.5–10 : 100–1000.

Reaction Condition Control

• Temperature: 10–100 °C (preferably 20–80 °C)

• Time: 0.2–12 hours

• Stirring: Maintain continuous stirring to ensure uniform reaction.

Post-treatment Steps
After the reaction is completed, cool the system to room temperature, then filter to remove residual methyltris(methyl ethyl ketoxime) silane, obtaining a clean aqueous solution of methyl ethyl ketoxime hydrochloride salt.

2. Precautions

• Prefer high-purity end-capping agents to improve cleaning efficiency.

• For wastewater treatment, technologies such as membrane separation, concentration, or desalination can be applied for further purification.